Muscle Mustang & Fast Fords Homepage Muscle Mustangs & Fast Fords
Share This Share This Num Posts    Sort Order
Charge motion plates  
dmc06gt
New User | Posts: 18 | Joined: 07/07
Posted: 10/15/07
07:17 PM

Any one installed any of these, or know of any one who have tried them? I have a few bolt on goodies so far, and was just wondering about them. So far I have the drag pack kit (4:10's) Short throw shifter, X-pipe, cold air-with steeda elbow, shorty headers,tuned exhaust, and SCT tune. And one of the best bolt ons-Steeda Stop The Hop Pak. 96% wheel hop free. Hooks up great in 1st and 2nd, and a little bark in 3rd, with manual tranny. I'm thinkin hi 12's.  Any one else try any of these yet??  


 
narshadda
New User | Posts: 33 | Joined: 07/07
Posted: 10/15/07
08:52 PM

Yep,

I put them in a month back and I absolutely love em! I have pretty much the same mods you do except for the x-pipe and shorty headers. The CMD plates give a very nice increase in torque down low and a lot of pep after 3500. The bark in 3rd is nicer than without them.
Just remember to keep your Cats if you do the midpipe - you will need a bit of back pressure for the CMD plates. Also, make sure you get a tune from steeda for them. If not, you won't take advantage of the extra airflow.  Not sure where you live but if you call Ft. Lauderdale, speak to Patt - he will explain everything.

-Narsh  


 
narshadda
New User | Posts: 33 | Joined: 07/07
Posted: 10/15/07
08:53 PM

oh, and high 12's sounds about right with Drag Tires and a good 60ft. A couple of guys on some of the forums are running 12.6-12.8 with those mods.  


 
dmc06gt
New User | Posts: 18 | Joined: 07/07
Posted: 10/16/07
05:35 PM

H  


 
dmc06gt
New User | Posts: 18 | Joined: 07/07
Posted: 10/16/07
05:36 PM

Hey, right on, for the info. I think that will be my winter project for the pony, the charge motion plates. I have talked to Don from Steeda, and he too is really helpful.I have the SCT tuner, and I guess it can hold 3 tunes. I need to find out more about the tuner as well. Just not fully aware of what it can do.    What about the under drive pullies? Anyone tried these yet? Thanks again for the info.  


 
narshadda
New User | Posts: 33 | Joined: 07/07
Posted: 10/17/07
08:05 PM

Glad I could help man. The charge motion plates are great for the price. They are easy to install as well. The tuner is a huge advantage as well since you can reprogram/tune the car at the track if need be. Steeda is very good about getting good tunes for a very reasonable price.
One more thing on the 1/4 times. I just got back from the track and had zero traction. I almost went sideways in 2nd every time and third was almost as bad.  I would highly recommend a set of Drag Radials or Slicks. Are you located in South Florda by chance?

-Narsh  


 
dmc06gt
New User | Posts: 18 | Joined: 07/07
Posted: 10/19/07
04:09 AM

Nope, I'm about as far away as possible. I'm up near Seattle. This will be my winter project for sure. All test and tunes are done up here until spring. It does rain as much as you hear.  I have been advised as well that some drag radials are in my future.  Dennis  


 
  • RSS Feed
    • Add to My Yahoo!
    • Add to Google
    • Subscribe on Bloglines
    • Subscribe on NewsGator
    • MyMSN
    • My AOL
    • Add to NetVibes
    • Add to Rojo
    • Add to NEWSBURST
    • Add to Technorati
    SUBSCRIBE TO OUR FORUMS