|
|
Item Posts
Sort Order
|
|
|
91 looking to get new heads
|
bkshot69
New User
| Posts: 2
| Joined: 03/09
Posted: 03/20/09
09:18 AM
|
|
Hello, Me again!!
Im looking to go with a little bigger heads than whats currently on my 91 GT.
I am looking at the Trick Flow TW Fast as Cast 190CC with the 64cc Exhaust.
My question is should I also be looking to go with OE Rods and Crank as well??
If so, any suggestions? I will be looking to go with a longer duration
Cam than whats on there now, it was set up for a 302 block that was bored
.30 over, now I have a 302 with .60 bore to it.
I have lost some of the ummph to her, so Im looking to obtain that
back and then some.
this is my project and I am not ready to go and tear it all down myself, so
the easiest way possible would be just fine for me for suggestions thanks!!
|
|
|
|
|
Posted: 03/21/09
02:41 PM
|
|
i need heads to one out of my windsor jrs warped i was looking at afr 185 or victor jr would like the afr's but the victors are 500 bucks cheaper in canada. from the info i have seen nothing can run with afrs out of the box??? i have a stock bottom end, e303, vortech 9psi, gt40 intake looking to switch cam also any suggestions for the right cam as for heads spend the extra and go with the afr's i think that's what i will do to
|
|
|
|
samk
New User
| Posts: 25
| Joined: 01/07
Posted: 04/15/09
01:24 PM
|
|
I have a stock bottom end (302) with 80K miles on it. It has the AFR 185's on it with a Victor Jr. and a 650 Demon, it run's low 12's. I have two other cars that I run Edelbrock Victor Jr's on and I have a set of the old Track Heat heads on. The AFR's cannot be beat!
|
|
|
|
|
|
|
|
|