|
|
Item Posts
Sort Order
|
|
|
About suspension
|
|
Posted: 07/19/04
08:59 AM
|
|
I will be running a setup a setup of about 600 to 800 horsepower and I was wondering what would be the best suspension setup without going with a four link or ladder bar and still drivable on the street. Thanks for helping me out.
|
|
|
|
|
Posted: 07/22/04
11:10 PM
|
|
If it were me just get some beefy sway bars and a good set of springs and struts/shocks and it should be fine, make sure all your busings are in good shape as well.
|
|
|
|
|
Posted: 07/25/04
09:44 PM
|
|
I would go with a torque arm from maximum motorsports or the steeda 5 link.
Big Thanks to my friends at KR Performance and Restoration out of Nebraska
|
|
|
|
|
|
BLOWN LX
New User
| Posts: 12
| Joined: 07/04
Posted: 07/31/04
05:34 PM
|
|
I would recomend what i am useing it's from Chassis Engineering called TOP GUN TRACTION SYSTEM www.chassisengineering.com check it out . It's a compleet kit with upper and lower adj. control arms " like a 4 link but less *** also adj. shocks with coil over springs , gets rid of your stock rear springs and relocates the adj shocks and coil over springs, you can also adj ride hight too. this is the ultimate ! traction is unreal ! i had lift bars on before and thy tore up my torque boxes. What motor are you running ? What set up do you have ? Blower ? hope it's not a stock block ? with that much power you need a dart block .
|
|
|
|
|
Posted: 08/04/04
01:33 PM
|
|
I plan on running a coast high 347 stroker with a procharger. The suspension is stock.
|
|
|
|
BLOWN LX
New User
| Posts: 12
| Joined: 07/04
Posted: 08/04/04
04:13 PM
|
|
JUST FOR YOUR INFO ANY GOOD TUNER WILL TELL YOU LIMIT YOUR HP WITH A STOCK BLOCK TO NO MORE THAN 650 MABY 680 OR YOU WILL REALY BE PUSHING THE ENVELOPE .
IM GETTING A DSS STROKER MY SELF SOON AND AM RUNNING A PROCHARGER NOW ON MY CAR , A P1SC I LOVE IT !
BLOWN LX
|
|
|
|
|
|
|